The Octave is a mid flexing all mountain boot designed for comfort and performance. The Zonal BOA® Fit System allows you to tighten the upper and lower sections of the boot independently. Let’s break this down- When you pull the liner lace, it’s actually going to pull the the top of the boot tight while securing the tongue of the boot over your foot and pushing your heel into the heel pocket. Stop reading and start buying. We promise, you’ll love the Octave.
Response
Mellow
Feel
6/10
Specialty
All Mountain, Park
Boot Outsole
Flex Light 2.0, Fusion Rubber, +SLIME Midsole
Boot Liner Insole
Impacto Primo
Boot Liner Pattern
Center Tongue™
Boot Last
Silver Last
Boot Construction Fit
IN2GRATED™, C.A.T.
Boot Construction Comfort
Heat Reflective Foil
Boot Liner Fit
Internal J Bars, External J Bars
Boot Liner Intuition Layup
Intuition™ Support Foam Liner
Zonal BOA® Fit System:
Dial activated fit system that allows for a precise closure in two zones.
BOA® Tongue Tied™:
This RIDE specific technology offers a secure fit in the ankle zone and eliminates the need for a traditional internal harness. The tongue integrated BOA® guides provides total tongue closure and next level heel hold without the potential pressure points. Depending on the model, Tongue Tied™ is paired with the traditional lace, BOA® Zonal or BOA® Coiler Fit System.
TX3 Lacing:
A non-stretch textile soft lace engineered to perform as strong as cable.
Flex Lite 2.0 Outsole:
Improves impact absorption with +SLIME midsole, stability and traction is maintained flex by utilizing Rubber pods underfoot. Unique channels allow for improved performance freestyle feel.
Fusion Rubber:
RIDE’S rubber compound that utilizes up to 30% reground rubber to reduce the amount of virgin rubber going into the outsole and reduce our “footprint” on the environment.
Impacto PRIMO insole:
Single density 3D formed insole with +slime foam. +slime hi-rebound foam is a proprietary foam blend that offers improved comfort and response underfoot.
Internal J Bars:
Superior ankle and heel hold with added support.
External J Bars:
Additional ankle and heel hold.
Intuition™ Support Foam Liner:
Enhanced high-density foam offers supportive performance with maintained comfort.
Lace Lock:
Just like it sounds, a way to lock your lace in place
Tongue Tied™ Hybrid Harness:
This Tongue Tied™ system integrates an additional upper harness with the inside liner pull for an ultra-secure fit.
Heat Reflective Foil:
Redirects heat underneath the foot and in the toe to help keep in the toasty warmth while charging up last chair.
In2Grated™ Construction:
In2grated™ Construction creates the lightest weight, shortest length performance boots on the market, hands down. The liner is factory molded inside the shell to create the most efficient "net fit", leading to less pack out for better overall comfort.
Articulated Cuff:
Check it out, at the ankle of the boot right there. See how the top and bottom are a little different? How the top is able to slide over the bottom? That's articulation for you, better fit, better flex, no weird flex points. Nice and smooth, just like it should be.
3D FORMED TONGUE:
Anatomically shaped 3D tongue gives lasting fit and durability.
Removable Liner:
This is the simplest piece of tech that has ever existed. The liner comes out of the boot. Why would you want that? Well pop those liners out after a wet or sweaty day to let those babys breathe! Dry 'em out and put on fresh boots the next day.
C.A.T. (Calf Adjustment Technology):
Designed specifically to increase comfort and ensure a perfect fit. This Velcro adjustment on the boot cuff allows for a one-of-a-kind custom fit in the calf zone. Loosen or tighten up the calf of the boot for a truly custom fit.
1:1 Lasting:
RIDE offers 1:1 lasting ensuring a seamless liner to shell integration for all whole and half sizes. Liner lasts anatomically shaped to your foot offers premium out of box liner comfort while shell last shaping precisely merges together for a uniform supportive fit.
Silver Last:
Performance designed, men’s specific fit. RIDE offers 1:1 lasting ensuring a seamless liner to shell integration for all whole and half sizes. Liner lasts anatomically shaped to your foot offers premium out of box liner comfort while shell last shaping precisely merges together for a uniform supportive fit.
80% Recycled, FSC® Certified Cardboard Packaging:
Need we say more? Recycled packaging = better packaging. Even certified by FSC(R).
Get the best fit possible. Jbars reduce heel lift inside your boots when they are fully laced up.
Compatible with: All Burton snowboard boots
Vans
Vans - Infuse Snowboard Boot
Regular price
$ 420.00
The Infuse is about performance. Always has been. Always will be. Since its earliest iterations, the drive towards progression has been central to its design. And this hands-down, next-level, best-in-class Infuse will reset your expectations of what a snowboard boot should be. Loaded with top-shelf features and the Vans Hybrid Plus BOA® Custom Fit System, it’s got just about everything you’ve ever wanted in a snowboard boot. Designed to address the needs of snowboarding’s Rocketman himself, the new Infuse is your ticket to a whole new level of progression. Houston to Arthur Longo, you are clear for lift-off.
The Infuse is made with leather, textile, and synthetic uppers.
• TERRAIN: BACKCOUNTRY, ALL-MOUNTAIN, AND PARK/STREET – This boot has been optimized for versatility, from parks and powder to urban environments, and everything in between. • V3 ULTRACUSH™ WITH THE NORTH FACE FLASHDRY™ LINER – This UltraCush™ liner incorporates the North Face’s FlashDry™ technology to keep you dry by eliminating moisture as fast as possible. An expanded Comfort Flex neoprene forefoot and an updated X-Cage for superior heel hold further enhance the comfortable fit. • V3 POPCUSH™ FOOTBED – From the tri-density POPCUSH™ construction to the OrthoLite® open-cell foam top layer, the V3 footbed provides the kind of comfort and performance that only Vans can offer. Plus, the TPU arch support heel clip provides stability while allowing torsional flex, and the advanced 3D-molded anatomical shape, nylex moisture-wicking top sheet, and anti-fatigue coring design further elevate your comfort. • V3 WAFFLE SUPERENDURO OUTSOLE WITH ALL-TRAC COLD WEATHER RUBBER COMPOUND - Inspired by the extended cross-country and off-road demands of moto enduro racing, the V3 SuperEnduro outsole is designed to offer maximum performance in and out of your bindings. Multi-directional tread design? Surface-level texturing for added traction? A molded TPU toe pick? Expanded impact absorption zone? Check, check, and check. There’s no keeping up with this all-terrain apex predator. • VANS HYBRID PLUS BOA® WITH CUSTOM SLIDE GUIDE – The Hybrid Plus system expands the range of flex control from the original Hybrid BOA® configuration by adding an extra BOA® lace that passes around the back of the boot and across the instep to optimize the lines of pull and maximize the flex control capabilities. • V3 HARNESS - This advanced support harness delivers our highest level of support to the ankle and instep, keeping the V3 liner and boot shell locked in and connected. • WATERPROOF ZIPPER SHROUD + D RING – This feature is a durable and weatherproof fabric shield that protects the lower part of your boot from snow, ice, and moisture. It also features a metal D-ring for securely fastening your pant gaiters to lock out snow. • VANS FLEX CONTROL SYSTEM - Our removable, high-rebound Hytrel® tongue stiffeners enable riders to custom-tune their boot flex. Keep both in for maximum support, use just one for increased lateral or medial response, or take them both out for a softer-flexing boot. As your boots soften up over time, add the tongue stiffeners back in to extend the life of your boots. • WATERPROOF, BREATHABLE VALVES - These waterproof valves allow one-way moisture management by transporting moisture away from your foot, ensuring breathability and thermal regulation for dry, comfortable feet. • POWERCUFF STRAP – Power is the operative word. It provides extra support at the top of the boot for increased stability and response. Its configuration gives riders customizable levels of engagement and the option of wrapping the strap around the internal liner or the exterior tongue. • HEAT RETENTION 360° – The newly improved thermal retention layer provides a 360° wrap of the toe box and between the outsole and the liner. This essential layer keeps heat in and cold out, ensuring all-day warmth and comfort. • SKILL LEVEL – Intermediate, Advanced • FLEX RATING – 6-9
Ride
Ride - Lasso Snowboard Boots 2025 - Black
Regular price
$ 380.00
Similar to the Lasso Pro but for the rider who’s looking for a little more flex in their pursuit of freestyle perfection, the Lasso comes with the H4 BOA® Coiler Fit System to ensure a strong and even hold while your foot is in the boot along with BOA® Tongue Tied™ which delivers a secure, micro-adjustable fit in the ankle and eliminates the need for a traditional harness. The Impact Rubber Cupsole with Ride Fusion Rubber uses recycled premium rubber and Eco +Slime Midsole for traction and cushioning, making the Lasso a must-have medium-stiff flexing boot that offers any rider a responsive feel with a hassle-free fit system.
In2grated Construction:
In2grated™ Construction creates the lightest weight, shortest length performance boots on the market, hands down. The liner is factory molded inside the shell to create the most efficient "net fit", leading to less pack out for better overall comfort.
L.S.D C.A.T. (Calf Adjustment Technology):
This L.S.D (Ladies' Specific Design) was made to increase comfort and ensure a perfect fit. This Velcro adjustment on the boot cuff allows for a one-of-a-kind custom fit in the calf zone.
Heat Reflective Foil:
Redirects heat underneath the foot and in the toe to help keep in the toasty warmth while charging up last chair.
Black Gold Liner Mesh:
This bamboo charcoal infused material naturally mitigates odors and moisture. Other benefits include improved temperature regulation and circulatory function.
HDR Premium Synthetics:
RIDE’s Premium PU material utilizes a proprietary resin that substantially improves durability and wear resistance. Used in high abrasion zones where bindings and board edges create focused wear, RIDE’s Premium PU has unmatched performance.
thirtytwo
Thirtytwo - TM-2 Double Boa 2024 - Black
Regular price
$ 420.00
Sale price
$ 252.00
DESCRIPTION
Scotty Stevens chooses the TM-2 because it's the most versatile boot in the line. With a medium flex its suitable for any riding style. A perfect fit right out of the box the TM-2 is both focused on comfort and durability with ultra-soft STI Energy Foam and protective Overmolds in all the right places. Dial in the fit with the Dual BOA Closure System featuring TX3 lace.
