Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels
Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels
Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels
Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels
Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels
Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels
Bones

Bones - Circle Skulls P5 Sidecut Widecut SPF Skateboard Wheels

$ 42.00

About Skate Park Formula™ (SPF)

Skatepark Formula™ (SPF) is very high quality urethane specifically formulated to resist flatspotting on slick or smooth surfaces while maintaining a higher rebound for a quicker response and a faster roll.

Skatepark Formula™ has a high resistance to abrasion while not compromising hardness and slide ability. Simply put… Skatepark Formula wheels grip better on slick surfaces, are almost impossible to flatspot, and are the fastest, longest lasting wheel on the market today.

You won’t find our Skatepark Formula from any other wheel supplier so get a set and find out for yourself what the word on SPF is all about.

About DUROMETER B SCALE

Shore Durometer A Scale is good, but it does not cover the entire range of skate wheel hardness and is very limited because the scale goes from 1 to 100 and anything over A 95A does not compute accurately.

Shore Durometer B Scale is perfect for skate wheels because:

  1. It is very similar to the A Scale, but reads 20 points lower, allowing the useful scale to be extended by 20 points, which covers the entire hardness range of skate wheels in one scale. It uses the same soft spring as the A Gauge, but the conical gauge needle of the D Scale.
  2. Because the spring is soft, the B Scale gauge needle does not puncture the skin of the wheel surface, resulting in the same reliable reading as the A Scale does.

Shore Durometer D Scale is designed for hard rubbers and rock hard urethanes, not soft, bouncy urethanes that are used in skate wheels. It has a very stiff spring behind its sharp conical needle and often punctures the skin of the wheel being measured, this resulting in 5-10 points softer reading than is correct. Thus, Shore D Scale should not be used for wheels in the useful skate wheel range.

You may also like

Lots of Deals!
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo
$ 65.00
Save $ 7.00
Lots of Deals!
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board of Missoula - Chris Fairbanks Cabin Wheel
Board Of Missoula
$ 35.00 $ 28.00
Lots of Deals!
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
Bones - ATF Rough Rider Skateboard Wheels
Bones
$ 48.00
Lots of Deals!
Powell Peralta - Dragon Formula Nano Cubic 93A
Powell Peralta - Dragon Formula Nano Cubic 93A
Powell Peralta
$ 49.00
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo - Sub Assemblies
Mini Logo

Mini Logo - Sub Assemblies

$ 65.00
*Please note: The 8" and 8.38" come with these components:
A-Cut 53mmx 101a wheels
Medium White 94a bushings
Curved Hanger + Straight Axle = locks you into grinds
*Please note: The 7.13" and 7.63" come with these components: 
SOFT Green 84a bushings
Trucks, wheels and bearings assembled in one package
SOFT 90a hybrid Formula Wheels


About Mini Logo™ Trucks

Our new Mini Logo™ high-performance trucks combine strength, stability, and smooth turning in a lightweight design with premium alloys, high-rebound bushings, and precision axles. Developed and tested at Skate One, the shape, materials, and finishes have been refined for MILITANT skaters right from the first turns and grinds -- No break-in time needed!

  • Precision 8mm axles with a slightly curved hanger to lock you into grinds
  • Ultra high-rebound urethane bushings for smooth, precise control
  • Lightweight hanger and baseplate
  • Lifetime warranty against manufacturer defects
  • 7.13” Trucks (with Soft Bushings) - fit 7.0” to 7.5” skateboards
  • 7.63" Trucks (with Soft Bushings) - fit 7.5" to 7.88" skateboards
  • 8.0" Trucks (with Medium Bushings) - fit 7.88" to 8.25" skateboards
  • 8.38" Trucks (with Medium Bushings) - fit 8.25 to 8.75" skateboards
  • 8.75" Trucks (with Medium Bushings) - 8.5" and larger skateboards
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board of Missoula x Chris Fairbanks Skateboard Wheel - Board Of Missoula
Board Of Missoula

Board of Missoula - Chris Fairbanks Cabin Wheel

$ 35.00 $ 28.00

Our 99 duro shop wheels are back in stock!

Artwork by comedian Chris Fairbanks screams Montana skate trips. Get them while you can! 

BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
BONES WHEELS ATF Rough Rider Skateboard Wheels Runners 59mm 80a 4pk - Board Of Missoula
Bones

Bones - ATF Rough Rider Skateboard Wheels

$ 48.00

ROUGH RIDERS

  • RUNNERS
  • high energy core
  • all-terrain formula 80a
  • white

About All Terrain Formula™ (ATF)

All-Terrain Formula™ (ATF) wheels are poured in a special soft urethane we call All-Terrain Formula or (ATF). ATF wheels are excellent for rougher terrain so regardless of road quality, this revolutionary formula will roll you there quickly and smoothly.

Satisfaction Guaranteed

All BONES WHEELS manufactured products are warranted against manufacturing defects for the useful life of the product. If you feel your skateboard wheels, bushings, or other BONES WHEELS products were defective, you may send it back to us, freight prepaid. We will inspect it and let you know of our findings. If we decide your returned product was defective or failed to give reasonable service, we will replace that product with a similar, available product of the same or better quality and pay for the shipping back to you. You can send in multiple products to be inspected for your return. We will evaluate each product separate and will replace any and all products found to be defective.

About BONES WHEELS

Product Performance: Many skaters assume the performance and quality of skate wheels are all the same. A wheel is a wheel is a wheel, they might often say. That's actually not the case. In fact, very large differences exist between the raw materials, manufacturing process, quality control and performance of different wheel brands. Up until now though, a wheel's reputation has been a combination of market hype, market muscle, skater support and word of mouth. Bones wheels popularity is largely a result of superior quality, performance and durability.

Real Value: BONES may not be the lowest-priced wheel, but our abrasion test chart shows why Bones is the best value. After all, what good is a cheaper wheel if it flat spots the first day? BONES wheels offer the best combination of product performance, durability, quality, and customer service available today. In other words, you might be able to find a lower price, but never a better value.

Our Strength: All BONES WHEEL unique formulas are solely developed and produced in our own manufacturing plant located in Santa Barbara, CA. Using drastically different physical and engineering properties for each formula, BONES creates unique urethanes for specific applications of skateboarding.

Powell Peralta - Dragon Formula Nano Cubic 93A
Powell Peralta - Dragon Formula Nano Cubic 93A
Powell Peralta

Powell Peralta - Dragon Formula Nano Cubic 93A

$ 49.00

NanoCubics™ feature the same classic design advantages, of the legendary Cubic and MiniCubic, reconceived for today's skating, and utilizing our amazing Dragon™ Formula.  

The NanoCubic's offset design allows it to have the perfect shape for both inner and outer edges to skate a wider range of obstacles.  NanoCubics are smaller, lighter, and offset, so their large outer edge rolls up curbs, walls, and over cracks, and it covers your axle and nuts.  The inner edge locks onto rails but releases when you need to. 

Outer Lip:

  • Protects your nuts!
  • Adds width and stability
  • Makes coconut wheelies possible
  • Climbs over coping, up onto curbs and up walls

Inner Lip:

  • Leaves more truck exposed
  • Grabs onto obstacles and locks in on grinds

About Dragon Formula: The amazing new Dragon Formula™ (DF) Urethane used to create these wheels is another industry leading innovation from Powell • Peralta. DF-93A Dragons will not only roll over rough terrain, but also grip and slide like 99A and 101A wheels do, so that you can do all your normal tricks and more on the greater range of skate terrains made skateable by its softer 93A hardness.

Speed: Dragons are very fast because DF-93A is super high rebound, an industry leading 18-20% higher than hard wheels. This higher rebound means you won’t lose speed in bowls or parks the way you would with an ordinary 93A wheel, and you will roll much smoother and faster on rough streets and sidewalks…even in places you used to have to walk your board.

Grip & Slide: Dragons slide on both rough and smooth terrains, and also grip when you need it. This is because Dragon Formula is not just an ordinary mid-90’s wheel formula. It has been developed over a ten year period to optimize and fine tune it to perfection. No other wheel can do what these Dragons can.

Durability: Dragon Formula is not only smooth, fast and slidable, it is also durable. The slidability comes from its unique blend of high performance materials by making the urethane weak so it will slide as the urethane wears away, not creating flats spots. Dragons are very long lasting so they are not only better skating, they are a great value too.

 

Outer Lip:

  • Protects your nuts!
  • Adds width and stability
  • Makes coconut wheelies possible
  • Climbs over coping, up onto curbs and up walls

Inner Lip:

  • Leaves more truck exposed
  • Grabs onto obstacles and locks in on grinds

    Powell Peralta - Dragon Formula AA Nano Cubic 97A
    Powell Peralta - Dragon Formula AA Nano Cubic 97A
    Powell Peralta

    Powell Peralta - Dragon Formula AA Nano Cubic 97A

    $ 48.00

    NanoCubics™ are inspired by and developed for Andy Anderson to help him expand his wide range of street, park and freestyle tricks on all terrains.  NanoCubics feature the same classic design advantages, of the legendary Cubic and MiniCubic, reconceived for today's skating, and utilizing a special version of our amazing new Dragon™ formula.  

    The NanoCubic's offset design allows it to have the perfect shape for both inner and outer edges to skate a wider range of obstacles.  NanoCubics are smaller, lighter, and offset, so their large outer edge rolls up curbs, walls, and over cracks, and it covers your axle and nuts.  The inner edge locks onto rails but releases when you need to. 

    Andy's NanoCubic is totally unique, bringing the best in wheel design and urethane formula together in one special wheel.

     

    Outer Lip:

    • Protects your nuts!
    • Adds width and stability
    • Makes coconut wheelies possible
    • Climbs over coping, up onto curbs and up walls

    Inner Lip:

    • Leaves more truck exposed
    • Grabs onto obstacles and locks in on grinds

    Urethane:

    • 97A Dragon Formula
    • Skate everything urethane
    • Slick on ledges and flip tricks
    • Fast in pools and bowls
    • Forgiving on city streets
    • Solid at the skatepark

    Next: Road Crew - Road Crew Wheels
    Back to Wheels
    Next: Road Crew - Road Crew Wheels