Complete Instructions, F-1 All Temp Rub On Wax 85g, Ceramic Stone, Durable Pouch, Edge Sharpener, Pocket Screwdriver.
1. Place Board or skis in a vise to secure and clean base with a fresh hot wax job and scrape or use ONEBALL base cleaner.
2. Check the side and base edges for burrs. Rub a ceramic, diamond or gummy stone over the area to remove burrs in preparation for edge shaping.
3. Use the ONEBALL edge tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction...look for the arrow.
4. If you like your board or skis to be catch free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approx. 1.5" past the edge contact point as your base lays flat.
5. For really sharp edges, take a fine diamond stone or polishing stone and go over the edge again using the same technique.
6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch free.
The Pocket Screwdriver Features:
Ratcheting T-handle designed for high torque output.
High quality micro adjustable parts.
High impact plastic handle.
Micro-stash compartment for bits in the handle.
Phillips stubby bit (for snowboard hardware), Phillips #2 & #3, Flat Head #4 & #6.
One Ball Jay
One Ball Jay - 4WD - 5 Pack 225G
New Formula Alert!
4WD is using our World Cup race proven base formulas.
When in doubt, on a trip, going to a race or you just want the best assortment of waxes in your tune bag. Look no further than the 4WD and X-Wax 5-packs!
Includes 5 - 45g bars of Warm, Cool, Cold, Ice Cold & Base Prep waxes. Be prepared with a wax for every snow condition. Race proven formulas using the highest quality hydrocarbon waxes. No additives. Contains no flouro. 4WD wax is an excellent everyday and training wax. For race days, get our X-Wax with Mineral Speed Additives.X-WAX
Warm = 32ºF to 28ºF (0ºC to -2ºC)
Cool = 28ºF to 21ºF (-2ºC to -6ºC)
Cold = 21ºF to 5ºF (-5ºC to -15ºC)
Ice Cold = 5ºF to -22ºF (-15ºC to -30ºC)
Base Prep = Used to clean and protect base 32ºF (0ºC)
Use:Hot Waxing: Base must be clean & dry. Hot wax your base with the temperature specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth.
ICE COLD waxes require complete scraping and brushing.
Dakine - Fidget Tool
The perfect pocket tool for emergency repairs and adjustments. The Fidget Tool has all the most common bits you'll need for field adjustments, including removable surfboard fins. And it has a built-in keychain ring, so you can keep it right at your side any time you leave home.
Dakine - Tour Snowboard Bag
When weight (and cash) is your highest concern, ditch the wheels but keep the features with the Tour Snowboard Bag. Load up the main compartment with a board, pair of boots, and extra outerwear, then throw essential items like tuning kits in the exterior zippered pocket. 360-degree padding keeps hardgoods protected, while the removable padded shoulder strap and dual end handles make for easy transportation. And the Tour is impressively lightweight—less than 4 pounds. So even when toting a full kit, you won't rack up extra baggage fees. Plus, it packs down tight for easy storage when not in use.
Airblaster - Leg Bag
Is it function or is it fashion? The clear answer is: Yes. The Leg Bag straps around your leg, carrying snacks, spare goggle lens, snowboard tool, lip balm, season pass or lift ticket, a little rub on wax, and/or a small plastic pirate knife. Like a fanny pack for your leg. Convenience and style in one studly package! Just remember, when you see a Leg Bag out on the hill, it’s very likely that there is a snowboard tool inside it. Get it? The Board Dork is inside the Leg Bag.
3D Airblaster Airpill logo embroidery
Zippered front pocket for wallet items
Front flap with Velcro closure and pass pocket window underneath
Cargo pocket for small snowboard tool
Secure side release buckle closure with adjustable ladder lock
Hidden pocket for Airblaster Air Goggle spare lens
Arbor - Universal Splitboard Skins
ARBOR + KOHLA SplitGrip
Navigate more technical ascents and reach new terrain with quality SplitGrip engineered, tested, and utilized in the Swiss Alps from the purveyors of trusted backcountry equipment Kohla, built uniquely for Arbor Snowboards. Arbor Snowboards x Kohla SplitGrip is designed to perfectly complement existing Arbor splitboards models with universal bail and butterfly clip for easy out-of-the-box, ready to use. New SplitGrip is engineered to sustain its bond to your base in even the harshest hiking conditions but easily releases when you peel from your base or when stored against itself. SplitGrip comes with a waterproof backing, increasing the life of the skin, and lightens your pack. The Kohla Mohair/Nylon blend provides an optimal uphill grip and smooth downhill glide that features the performance and durability that Arbor Snowboards is known for.
The Slider Pin secures the Slider Track to the splitboard in tour and ride modes. The stainless steel cable lanyard is attached to your binding to prevent the pin from being lost in the backcountry. It is advisable to carry a spare.
Voile - Splitboard Dual Height Climbing Heels
Upgrade your splitboard with the new Voilé splitboard dual height climbing heels. The back climbing wire is the standard height of 55mm and the front wire is 75mm.
Includes one pair of dual height climbing heels/wires and screws to mount to an inserted, factory-built splitboard.
One Ball Jay
One Ball Jay - Climbing Skins Wax
We worked with Billy Goat Temple Cummins on this long time coming project. Skin wax will keep your skins gliding and in great shape!
Union - Split Clips and Hooks
Splitboard Clips and Hooks - Pass Through Holes
Use Union splitboard tip/ tail clips + board hooks to help your splitboard stay together when you're riding. Made for splitboards with pass through holes.
Clips Aluminum Clip x 4 Injected Plastic Clip Cover x 4 Octagonal Bolt (M5) x 8 Clip Screw Countersunk Head 1-1/8'' Allen Key (M5 x12mm) x 8 Hooks Injected Plastic Hook x 2 Hook Screw (M4 x 8mm) x 4 Hook Washer (Ø 7 x 3.5mm) x 4 Hook Insert (M4) x 4
Union - Rover Approach Skis
Tired of crowded resorts and long lines? Deep days await with the Union Rover approach skis. Explore your local hills, backcountry or closed resorts, all while enjoying the rideability of your favorite snowboard in your quiver. The Union Rover works in perfect harmony with the Union Explorer bindings, and easily swaps onto your regular snowboard in seconds so you can enjoy the ride down.
Light and Maneuverable Fast and Easy Transitions Integrated Climbing Skins Ride the Solid Board of your choice for any condition or terrain Hand-Crafted in Austria at The Capita Mothership with 100% Clean Energy
• Width: 85cm - 135mm / 100cm - 152.5mm
• Wood Core: FSC Certified Select Core
• Glass: Special Blend Fiberglass + Magic Bean Resin
Why mess with a good thing? This is our dependable, old school leash made with 1-inch webbing and a durable lightweight side-release buckle. It's everything you need and nothing you don't, and it's compatible with any boot or snowboard binding combination.
Burton - Cord Leash
Just in case your bindings spontaneously combust.
It's a silly rule, but the leash law is still selectively enforced at a surprising number of resorts. Don't be left off the lift because you left your leash at home. Buy this one and loop it to your binding, stash it in a pocket, or store it in your day pack. We won't rat you out.
Burton - Large Scraper Matt
Like AWD for the lift line.
Stomp mats are one thing, but a scraper mat has more than just one use. Made for coastal climates where snow regularly cakes up underfoot or ice coast riders who shred often in man-made conditions, this pad helps clear off excess accumulation when strapping in yet still provides stability in icy lift lines.
Crab Grab - The Bone
IT'S BONE TIME.
1 Per Pack
8" x 2"
Longer then a Grab Rail, yet shorter then a Skate Rail, The Bone provides the perfect topsheet grip to bone out your grabs. This foam, is bad to the bone.
Foam squishes into the tread on your boot creating a solid bond.
Foam is lightweight and feels nice.
Foam doesn’t look like some heinous chunk of plastic stomp pad you’d find on a rental board.
C-Foam™ - Our specifically formulated rubbery foam blend that’s lightweight, heavy duty, and grabs like a crab.
Screw Glue™ - Glued on. Like it was screwed on.
Gripples™ - Our signature t
One Ball Jay
One Ball Jay - Boom Folding Tool
This light-weight ONE MFG Folding tool does the trick on the mountain or at home turning your screws. Steel and alloy construction. Easily tightens critical screws with plenty of torque. Folding design fits in every pocket.
This is our smaller mini 65g bar of our 4WD wax. This Cold Temperature ski and snowboard wax is a great all purpose wax at a great price. Race proven formulas using the highest quality of hydrocarbon waxes. No additives. Available in four temperatures that offer the best value in the industry! Contains no flouro.
Base Prep= Used to clean and protect base 32ºF (0ºC)
Also sold in smaller 165g bars, 750g bulk bars and 5 pack w/assorted temperatures.
Burton - Riglet Board Reel
A flat-ground teaching tool to get the youngest kids standing sideways.
Attach this nifty reel to the nose of the youth Chopper®, Chicklet, Riglet, and After School Special snowboards and you have a quick and easy way to pull your lil' one around while they get used to standing sideways. Better yet, at the mountain, you can use it to easily chauffeur them back to the lift to maximize their shred time.
Burton - EST Tool
Pocket-friendly and powerful for mounting and adjusting any binding.
Our most pocket-friendly and popular tool for on-hill adjustments, the Burton EST® Tool's stealth sCrewneckdrivers provide maximum tightening power in the smallest package possible. An integrated bottle opener cracks open a cold one on the tailgate.
Burton - Web Leash
Obey the law.
Believe it or not, some resorts still choose to enforce antiquated leash laws. For those throwback locations, we still make a leash. And if you noboard, well, then this is pretty essential.
Burton - Bullet Tool
Speed and safety make this five-in-one ratcheting tool the choice of pros and ams alike. The low-profile shape prevents impactful landings when pocketed, while a foldout handle provides maximum cranking power for tightening sCrewnecks. It's glove-friendly and stocked with two-ended Phillips and flathead/Allen bits, as well as a mini binding wrench, all securely stowed inside the tool when not in use.
Volcom - Mini Stone Stomps
Adjust their stomp pad to suit their setup with the Mini Stone Stomps. 4 adhesive studs let you place them right where they need them for extra grip when they're pushing through the lift line.
Peel and Stick Using 3M Adhesive Backing. Pack of 4 Stones. Sold Individually by Color
Burton - Sidehill Pack 18L
A low-profile panel-loader pack for making sure you have what you need for short side and backcountry laps.
Being ready is more than a state of mind. In the backcountry, it's about having what you need. The Burton Sidehill 18L Backpack offers the space to hold your skins and avalanche safety tools plus basics like water, goggles, and a layer for quick-hit backcountry laps. Low-profile by design, it rides well and makes finding what you need easy. There's plenty of strapping options for poles, board, and your helmet, too.
20in x 12in x 6in
51cm x 31cm x 16cm
1.75lbs / 0.79kg
Features + Tech
Sustainable & Bluesign®
Ergonomic Shoulder Straps
Ergonomic Back Panel
Burton - [ak] Dispatcher 35L Backpack
The biggest in our series of purpose-built backcountry packs, this is the workhorse model for big days and mid-winter tours where that extra layer and water bottle are mandatory.
Everything you need in a pack and nothing you don't. The Burton [ak] Dispatcher 35L Backpack takes a clean, minimalist approach to a pack that's sized for full-day backcountry touring. Dedicated avalanche tool storage makes for quick access to your shovel and probe. Back panel access gives you wide entry and full visual to find exactly what you need. Multiple equipment carry options and stowable pole/axe loops keep your gear secure for the up and the down. Little details like the snow-shedding back panel and fleece-lined goggle pocket make a difference while supporting the pack's overall mountain-minimalist design.
22in x 12in x 7in
56cm x 30cm x 18cm
3.1lbs / 1.41kg
Features + Tech
Sustainable & Bluesign®
Ergonomic Shoulder Straps
Burton - Space Sack Snowboard Bag
Baseline protection for both your board and your buddy's car. Simplified, durable design with room for multiple decks.
If you pack light or just want simple security, the Burton Space Sack board bag will save your season. With enough room for your board and an extra deck, it's guaranteed to please when doing day trips by car, bus, or train. With sizes to fit any board from a 129cm to a 181cm, the Space Sack defines rugged, no-nonsense snowboard protection and is also an ideal way to store your board in the off-season.
For more info about upcoming events, sales, exclusive deals and more!