Triangle scrapers offer more sharp edges to use.

Our 6 inch long, clear, ultra thick snowboard wax scraper is made from 1/4" thick high grade acrylic producing a super sharp edge and the extra thick material is heavy duty and has zero flex.  Acrylic is a better material than simple plastic because of the ability to get a sharp edge.  If the edge gets built up with wax or starts to feel dull run it across a steel file or some sand paper to sharpen it back up.  Notched corner allows for easy cleaning of wax off your steel edges. All you need to get the job done.

Size: 3" x 6" x 1/4" thick

Our 12 inch long snowboard wax scraper allows you to cover a lot of ground with each pass.  Made from 1/8" thick high grade acrylic producing a super sharp edge.  Acrylic is a better material than simple plastic because of the ability to get a sharp edge.  If the edge gets built up with wax or starts to feel dull run it across a steel file or some sand paper to sharpen it back up.  Notched corner allows for easy cleaning of wax off your steel edges. All you need to get the job done.

Instructions:

1. Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).

2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!

3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.

4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.

5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast. 

Keep your foot where it should be.

We mold and then produce these pads in our Belfair Factory!

Instructions: 

1. Clean board surface and dry completely. Use ONEBALL base cleaner, rubbing alcohol, or another solvent may be needed to get off dirt. Let the solvent dry for 10 minutes. 

2. Mark area where pad will be placed with pencil first. Peel off backing of pad. Place stomp pad in front of your back foot binding and center edge to edge.

3. Only stick once, do not move, making sure not to damage adhesive. Use your fingers to press on pad with firm pressure. Use a hair dryer or heat source to help the pad stick if you want. 

4. Let stomp pad adhere to board for a minimum of 12 hours before using. Better yet, bring your board inside your house and let the stomp pads rest overnight. 

THERE’S NO ESCAPE.

• 1 per pack 
• Dimensions: 7" x 7.3" 

Stick this large format foam traction to your topsheet and lure your slippery boot into its grippy grasp. Whether you have big feet, a big board, or just big plans, this oversized trap will catch any size boot that comes its way. Inspired by the proven pattern of Maryland-style chicken wire traps of the Chesapeake Bay. Boot treads go in, but they don’t come out.

TECHNOLOGIES:

• 22 Holes! Because 21 isn't enough, and 23 would just be ridiculous.
• Hexaholes™ - Boot treads go in, but they don’t come out.
• King Sized - It’s gigantic, yet it still fits every size snowboard and any size boot.
• C-Foam - Our specifically formulated rubbery foam blend that's lightweight, heavy duty, and grabs like a crab.
• Screw Glue - Glued on. Like it was screwed on.
• Gripples - Our signature texture: tiny little gripping nipples for maximum grippy-ness.

WHY FOAM?

• Foam squishes into your gloves or the tread on your boots creating a solid bond.
• Foam is lightweight and feels nice. 
• Foam doesn't look like some heinous chunk of plastic stomp pad you'd find on a rental board.

Shoe GOO is the #1 shoe repair adhesive! It’s ideal for fixing worn soles or damaged heels, coating shoes to prevent premature wear and sealing galoshes, waders or rubber boots. The unique formula is designed for strong abrasion resistance and better adhesion to flexible materials.

• Bonds, protects and rebuilds for a permanent repair 
• Excellent sealant – perfect for patching small holes 
• Waterproof – bond remains secure even when exposed to water 
• Creates extra traction – can even be used on skateboards! 

Krooked - Riser Pads

Get it Straight

KEEPING THE UNDERGROUND LIT

The Spitfire Formula 4 Lock-In 99a Wheels are an asymmetrically shaped wheel designed for more control. A conical cut on one side with a straight edge cut on the opposite built for precise lock in grinds. Tested by Spitfire Team riders, Formula Four Performance Urethane lasted longer, withstood more abuse and performed superior to all other wheels. Spitfire Formula Four Urethane was developed to combine all the desired properties of a performance wheel without sacrificing any one attribute at the expense of another. Formula Four's True lasting Performance Urethane comes not from a single benefit, but from a combination of qualities and features that together produce a truly great wheel, Formula Four Performance Urethane is unlike any other.

Specs:

• More speed and control on all surfaces
• Unmatched flatspot resistance
• Smooth anti-stick slide
• High rebound compound
• 100% true performance urethane
• Holds shape longer
• 99a durometer
• Asymmetrically shape designed for Lock-In grinds

SLAPPY TRUCKS / HAVE FUN WITH US

Designed and tested by skaters, for skaters; The Slappy ST1 Hollow Trucks offers the best grind clearance in the game without compromising your turn. You get a light and strong truck with a classic look and feel to keep you rolling more comfortably than ever with hollow kingpins and axles.

Features:

• Hollow kingpins and axles 
• Optimum grind clearance
• Polished hanger
• Polished baseplate
• Classic kingpin

This is our smaller mini 65g bar of our 4WD wax. This Cold Temperature ski and snowboard wax is a great all purpose wax at a great price. Race proven formulas using the highest quality of hydrocarbon waxes. No additives. Available in four temperatures that offer the best value in the industry! Contains no flouro.

• Warm = 32ºF to 28ºF (0ºC to -2ºC)
• Cool = 28ºF to 21ºF (-2ºC to -6ºC)
• Cold = 21ºF to 5ºF (-5ºC to -15ºC)
• Ice Cold = 5ºF to -22ºF (-15ºC to -30ºC)
• Base Prep = Used to clean and protect base 32ºF (0ºC)

Size: 65g

Also sold in smaller 165g bars, 750g bulk bars and 5 pack w/assorted temperatures.

All OJ skateboard wheels are sold as sets of 4.

SLAPPY TRUCKS / HAVE FUN WITH US

• Aluminum Hanger and Baseplate
• Inverted Kingpin
• Quickest Turn
• Best Grind Clearance
• Less Wheel Bite
• No break in time
• 100% More Fun

To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below:
19.25 – 22 in (50 – 56 cm)

Heavyweight cord with metal snap leash.

Sold in singles.

Instructions:

1. First things first, ONEMFG is not responsible for you putting your leash on wrong or even if it fails while you're using it. Leashes are designed for people who have a hard time keeping track of their board. That's it. Always hang onto your board on a hill. Never let go of your board for any reason. LOOSE BOARDS CAN HURT PEOPLE!

2. Take the string part of the leash and loop it through a hole some place on the base-plate of your front foot binding. Loop the leash back through the loop you pushed through the hole and pull tight! Your leash should now be attached to your binding. If it's not, you need to work on it and get some help. 

3. When you strap on your bindings, strap the leash to your front boot just above or below the ankle strap or on the laces if available. If you have a smaller leash, you would use the snap clasp at the end of the leash to snap onto the metal D ring that is fixed to your laces or even you're laces themselves. Replace when and if the leash becomes worn out. 

The Black and White Checker combo pack is available in 2 sizes Youth Small and Youth Medium. 

Each set comes with Knees, Elbows and Wrist guards. The main image of the 3 pieces included in the combo pack is our Youth MD. Youth Small knees are shown in the single knee pad image